KODA 200 is a web-based Ethernet I/O Controller with real time remote control capability, email alerts of various user selectable events. It is built on TCP/IP platform with a built in web server which allows you to access, control and monitor your equipment over the Internet accurately and easily from anywhere. As part of the software there is a built in scheduler with a simple rule, gives you the ability to have one KODA control another. This capability built into all units allows you to use the input or relay on one device to control a relay on another device over a network, or to take a signal from your main location system, and trigger remote equipment in different locations. KODA 200 is a housed unit with a DIN rail mountable enclosure that can be snapped onto DIN rail or attached to any flat surface such as a wall or under a counter. It has 4 relay outputs which can drive 10V 50mA to external devices, 2 optically isolated digital inputs. The digital input data can be used to calculate a range of results such as:
State - This is useful for knowing if an input is on or off, like a door switch being on or off.
Counter- Non-resettable/resettable counter.
Frequency - Counts the frequency of an input in KHz (kilo hertz or1/1000 seconds). This could be useful in displaying a tachometer where 60Hz = 1 RPM.
Period - in 1/1000 seconds an input in kHz (milli-seconds or1/1000 seconds). This would be useful for measuring timed events.
KODA 200 is ideal for applications that require web remote control & monitoring such as security, access control, industrial equipment monitoring, building automation system, home automation, and much more.
The Key Features
Compact and self-contained: The KODA 200 is an all-in-one web controller with the hardware/software you need to control your electrical devices/equipment over the Internet. Use it out of its packaging, wire your devices/equipment with the controller, connect power and network with the provided cables, it’s ready to go.
Easy-to-Install: Use KODA 200 as either a network device or a standalone device. Install the KODA 200 anywhere on the network and do not require a direct connection to the PC. Then use our "Discover" program to automatically locate your device within your network. Click on the item and the web page opens up. Logon in and start setting your devices. The KODA 200 can also be used as a standalone device. Plug a computer in and load your schedules then unplug and let it run without a network connection. It is that easy.
With POE (Power over Ethernet) enabled, KODA 200 is easy to install and connects through your Ethernet connection without the need for additional power, providing you tremendous cost-savings and flexibility when installing KODA 200 in your control system.
Easy-of-use: The built in web interface provides quick access to setup and manage your devices with no additional software or programming required. The removable wire terminal connectors simplify field installation and allows for easy troubleshooting and maintenance, the unit can be removed from the system without disturbing the system wiring.
Fully programmable: The digital input data can be used to calculate a range of results such as state, counter, frequency and period. Supplied with up to 16 schedules and a simple rule “If Device A or B Data XXX then Device C Action XXX” setting, gives you the ability to have one KODA control another. This capability built into all units allows you to use the input or relay on one device to control a relay on another device over a network.
Real Time Clock & Email Alerts: The KODA 200 controller comes with built in real time clock with NTP automatic Internet time setting, provides real-time monitoring capability, email alerts of various user selectable events.
10M/100M RJ45 Internet interface with connection and activity LEDs
4 1-Form-A relays 48 Volt Max 1A dry contact or drive 10V ±10% 50mA to external devices
2 optically isolated digital inputs, 12V 1mA or pull down switch selectable
Status LEDs (pulse, bootloader, and locate)
Ethernet Bootloader (for server hardware code)
POE or 12VDC @500mA (nominal)
AC converter supplied, 100-240VAC50/60Hz
Reset/Locate push-button (blue LED)
Working Temperature from 0 to +70 Celsius
Storage Temperature from -40 to +125 Celsius
Humidity from 10% to 80% non-condensing
Dimensions: 70mm x 100mm x 25mm
Supported Protocols: HTTP/HTTPS/SMTP/SNTP